Home FortiGate Firewall
product Description :
The FortiGate 7030E chassis schematic below shows the communication channels between chassis components including the management module (MGMT), the FIM (called FIM1) and the FPMs (FPM3 and FPM4).
The management module (MGMT, with Intelligent Platform Management Bus (IPMB) address 0x20) communicates with all modules in the chassis over the base backplane. Each module, including the management module includes a Shelf Management Controller (SMC). These SMCs support IPMB communication between the management module and the FIM
and FPMs for storing and sharing sensor data that the management module uses to control chassis cooling and power distribution. The base backplane also supports serial communications to allow console access from the management module to all modules, and 1Gbps Ethernet communication for management and heartbeat communication between modules.
FIM1 (IPMB address 0x82) is the FIM in slot 1. The interfaces of this module connect the chassis to data networks and can be used for Ethernet management access to chassis components. The FIM includes DP2 processors that distribute sessions over the Integrated Switch Fabric (ISF) to the NP6 processors in the FPMs. Data sessions are communicated to the FPMs over the 80Gbps chassis fabric backplane.
FPM3 and FPM4 (IPMB addresses 0x86 and 0x88) are the FPM processor modules in slots 3 and 4. These worker modules process sessions distributed to them by the FIM. FPMs include NP6 processors to offload sessions from the FPM CPU and CP9 processors that accelerate content processing.
Product Description :
FIM modules
FIM modules are hot swappable interface modules that provide data and management interfaces, base
backplane switching and fabric backplane session-aware load balancing for the chassis. The FIM modules
include an integrated switch fabric and DP2 processors to load balance millions of data sessions over the chassis
fabric backplane to FPM processor modules. The following FIM modules are available
The FIM-7901E includes thirty-two front panel 10GigE SFP+ fabric channel interfaces (A1 to A32). These interfaces are connected to 10Gbps networks. These interfaces can also be configured to operate as Gigabit Ethernet
interfaces using SFP transceivers.
The FIM-7904E includes eight front panel 40GigE QSFP+ fabric channel interfaces (B1 to B8). These interfaces are
connected to 40Gbps networks. Using 40GBASE-SR4 multimode QSFP+ transceivers, each QSFP+ interface can
also be split into four 10GBASE-SR interfaces and connected to 10Gbps networks.
The FIM-7910E (shown in FIM modules on page 6) includes four front panel 100GigE CFP2 fabric channel
interfaces (C1 to C4). These interfaces can be connected to 100Gbps networks. Using 100GBASE-SR10 multimode
CFP2 transceivers, each CFP2 interface can also be split into ten 10GBASE-SR interfaces and connected to 10Gbps networks.
The FIM-7920E includes four front panel 100GigE QSFP28 fabric channel interfaces (C1 to C4). These interfaces can be connected to 100Gbps networks. Using a 100GBASE-SR4 QSFP28 or 40GBASE-SR4 QSFP+ transceiver, each QSFP28 interface can also be split into four 10GBASE-SR interfaces and connected to 10Gbps networks
Product Description :
FortiGate 7040E Chassis
The FortiGate 7040E is a 6U 19-inch rackmount 4 slot chassis with a 80Gbps fabric and 1Gbps base backplane designed by Fortinet. The fabric backplane provides network data communication and the base backplane provides management and synch communication among the chassis slots. Power is provided to the chassis using three hot swappable 2+1 redundant 100 240 VAC, 50-60 Hz power supply units (PSUs). You can also optionally add a fourth PSU. The FortiGate 7040E can also be equipped with three or four DC PSUs allowing you to connect the chassis to 48V DC power
FPM 7620E FPM modules
The FPM-7620E modules are hot swappable processor modules that provide FortiOS firewalling and security services. The FPM modules function as workers, processing sessions load balanced to them by the FIM modules.FPM modules include multiple NP6 network processors and CP9 content processors to accelerate traffic.
FortiGate 7040E back panel
The FortiGate-7040E chassis back panel provides access to three hot swappable cooling fan trays and three hot swappable AC or DC PSUs. A fourth slot is available for including a fourth PSU for additional redundancy. At least two PSUs (PWR1 and PWR2) must be connected to power. PWR4 is a backup power supply
Product Description :
FortiGate 5001E and FortiGate 5001E1 security system
The FortiGate 5001E security system is a high-performance Advanced Telecommunications Computing Architecture (ATCA) compliant FortiGate security system that can be installed in any ATCA chassis that can provide sufficient power and cooling. The FortiGate-5001E1 security system adds an internal 480 GByte SSD log disk. In all other ways the FortiGate-5001E and the FortiGate-5001E1 are identical
The FortiGate 5001E security system contains two front panel 40GigE QSFP+ fabric channel interfaces, two front panel 10GigE SFP+ fabric channel interfaces, two base backplane 1Gbps base channel interfaces, and two fabric backplane 40Gbps interfaces. The front panel SFP+ interfaces can also operate as Gigabit Ethernet interfaces using SFP transceivers. Use the front panel interfaces for connections to your networks and the backplane interfaces for communication across the ATCA chassis backplane. The FortiGate-5001E also includes two front panel 10/100/1000BASE-T out of band management Ethernet interfaces, one RJ45 front panel serial console port, and one front panel USB port.
Front panel components
From the FortiGate-5001E front panel you can view the status of the front panel LEDs to verify that the board is functioning normally. You also connect the FortiGate-5001E to your 40-gigabit network using the front panel QSFP+ connectors and to your 10-gigabit network using the front panel SFP+ or SFP connectors. The front panel also includes two Ethernet management interfaces, an RJ-45 console port for connecting to the FortiOS CLI and a USB port. The USB port can be used with any USB key for backing up and restoring configuration files
Product Description :
40 GE QSFP Slots : 4
10 GE SFP+ / GE SFP Slots : 20
10 GE SFP+ Slots (Ultra-low Latency) : 8
GE RJ45 Management Ports : 2
USB Ports (Client / Server) : 1 / 1
Console Port : 1
Internal Storage : 2x 2 TB HDD
Included Transceivers : 2x SFP+ (SR 10GE)
IPS Throughput : 28 Gbps
NGFW Throughput : 4 20 Gbps
Threat Protection Throughput : 5 13 Gbps
Product Description :
The Fortinet Enterprise Firewall Solution
The FortiGate 100E series delivers next generation firewall capabilities for mid-sized to large enterprises, with the flexibility to be deployed at the campus or enterprise branch. Protect against cyber threats with security processor powered high performance, security efficacy and deep visibility.
Security
Protects against known exploits, malware and malicious websites using continuous threat intelligence provided by FortiGuard Labs security services
Identify thousands of applications including cloud applications for deep inspection into network traffic
Detects unknown attacks using dynamic analysis and provides automated mitigation to stop targeted attacks
Performance
Delivers industry’s best threat protection performance and ultra-low latency using purpose built-security processor (SPU) technology
Provides industry-leading performance and protection for SSL encrypted traffic
Networking
Delivers an extensive routing, switching, wireless controller and high performance IPsec VPN capabilities to consolidate networking and security functionality
Enables flexible deployment such as Next Generation Firewall and Secure SD-WAN
Product Description :
3G/4G WAN Connectivity
The FortiGate 90E includes USB ports that allow you to plug in a compatible third-party 3G/4G USB modem, providing additional WAN connectivity or a redundant link for maximum reliability
Compact and Reliable Form Factor
Designed for small environments, you can simply place the FortiGate 90E on a desktop. It is small, lightweight yet highly reliable with superior MTBF (Mean Time Between Failure), minimizing the chance of a network disruption.
Security Fabric
The Security Fabric allows security to dynamically expand and adapt as more and more workloads and data are added. Security seamlessly follows and protects data, users, and applications as they move between IoT, devices, and cloud environments throughout the network
Product Description :
Security Fabric
The Security Fabric allows security to dynamically expand and adapt as more and more workloads and data are added. Security seamlessly follows and protects data,
users, and applications as they move between IoT, devices, and cloud environments throughout the network. FortiGates are the foundation of Security Fabric, expanding
security via visibility and control by tightly integrating with other Fortinet security products and Fabric-Ready Partner solutions.
FortiOS
Control all the security and networking capabilities across the entire FortiGate platform with one intuitive operating system. Reduce operating expenses and save time
with a truly consolidated nextgeneration security platform
Overview:
The FortiGate/FortiWiFi 30E are compact, cost effective, all-in-one security appliances that deliver Fortinet’s Connected UTM. Ideal for small business, remote,
customer premise equipment (CPE) and retail networks, these appliances offer the network security, connectivity and performance you need.
High Performance Network Security
Built on the foundation FortiOS 5, the FortiGate/FortiWiFi 30E series provides an integrated set of essential security technologies to protect all of your applications
and data. You get advanced threat protection, including firewall, application control, advanced threat protection, IPS, VPN, and web filtering, all from one device
that’s easy to deploy and manage. With our FortiGuard® security subscription services you’ll have automated protection against today’s sophisticated threats.
Advanced Features
The FortiGate/FortiWiFi 30E offers beyond the industry’s best firewall with the latest in Advanced Threat Protection including Sandboxing and anti-bot protection,
Feature Select Options for simplifying configurations and deployments, and Contextual Visibility for enhanced reporting and management.
VDOMs on the FortiGate/FortiWiFi 30E let you segment networks to enable guest and employee access, or protect things like cardholder data. You get the flexibility to
match your business needs and meet compliance standards like PCI and HIPAA